Roland XV-5050 Owner's Manual page 82

Chapter 4 Using the XV-5050 Effects
25: GATED REVERB
This is a special type of reverb in which the reverb is cut off without
being allowed to decay naturally.
fig.02-025m
L in
Balance D
Gate Reverb
R in
Balance D
Parameter Value
Type NORMAL,
REVERSE,
SWEEP1,
SWEEP2
Pre Delay 0.0-100.0 ms
Gate Time 5-500 ms
Low Gain -15-+15 dB
High Gain -15-+15 dB
Balance # D100:0W-
D0:100W
Level # 0-127
26: OD -> CHORUS
fig.02-026m
L in
Overdrive
R in
Parameter Value
OD Drive 0-127
OD Pan # L64-63R
Cho Rate 0.05-10.00 Hz
Cho Depth 0-127
Cho Delay 0.0-100.0 ms
Cho Balance # D100:0W-
D0:100W
Level 0-127
82
2-Band
L out
EQ
Balance W
Balance W
2-Band
R out
EQ
Description
Type of reverb
NORMAL: conventional gated reverb
REVERSE: backwards reverb
SWEEP1: the reverb moves from right
to left
SWEEP2: the reverb moves from left to
right
Adjusts the time until the reverb
sound is heard.
Adjusts the time from when the re-
verb is first heard until it disappears.
Gain of the low frequency range
Gain of the high frequency range
Volume balance between the direct
sound (D) and the reverb sound (W)
Output level
L out
Balance D
Balance W
Chorus
Balance W
R out
Balance D
Description
Degree of distortion
Also changes the volume.
Stereo location of the overdrive
Frequency of modulation
Depth of modulation
Adjusts the time until the chorus
sound is heard.
Adjusts the volume balance be-
tween the sound sent through
the chorus (W) and the sound
that's not sent through the cho-
rus (D).
Output level
27: OD -> FLANGER
fig.02-027m
L in
Overdrive
R in
Parameter Value
OD Drive 0-127
OD Pan # L64-63R
Flg Rate 0.05-10.00 Hz
Flg Depth 0-127
Flg Feedback -98-+98 %
Flg Delay 0.0-100.0 ms
Flg Balance # D100:0W-
D0:100W
Level 0-127
28: OD -> DELAY
fig.02-028m
L in
Overdrive
R in
Parameter Value
OD Drive 0-127
OD Pan # L64-63R
Delay Time 0.0-500.0 ms
Dly Feedback -98-+98 %
Dly HF Damp 200-8000 Hz,
BYPASS
Dly Balance # D100:0W-
D0:100W
Level 0-127
Balance D
L out
Feedback
Balance W
Flanger
Balance W
R out
Balance D
Description
Degree of distortion
Also changes the volume.
Stereo location of the overdrive
Frequency of modulation
Depth of modulation
Adjusts the amount of the
flanger sound that's fed back
into the effect. Negative (-) set-
tings invert the phase.
Adjusts the time until the flanger
is heard.
Adjusts the volume balance be-
tween the sound sent through
the flanger (W) and the sound
that's not sent through the
flanger (D).
Output level
L out
Balance D
Balance W
Delay
Balance W
Feedback
R out
Balance D
Description
Degree of distortion
Also changes the volume.
Stereo location of the overdrive
Adjusts the time until the delay is
heard.
Adjusts the amount of the delay
sound that's fed back into the ef-
fect. Negative (-) settings invert the
phase.
Adjusts the frequency above
which sound fed back to the effect
is filtered out. If you don't want to
filter out any high frequencies, set
this parameter to BYPASS.
Adjusts the volume balance be-
tween the sound sent through the
delay (W) and the sound that's not
sent through the delay (D).
Output level