Roland XV-5050 Owner's Manual page 80

Chapter 4 Using the XV-5050 Effects
18: MOD DELAY (Modulation Delay)
Adds modulation to the delayed sound, producing an effect similar
to a flanger.
When Mode is NORMAL:
fig.02-018am
Balance D
L in
Delay
Modulation
Feedback
Feedback
Delay
Modulation
R in
Balance D
When Mode is CROSS:
fig.02-018bm
Balance D
L in
Delay Modulation
Feedback
Feedback
Delay Modulation
R in
Balance D
Parameter Value
Delay Left 0.0-500.0 ms
Delay Right
Feedback -98-+98 %
Mode NORMAL,
CROSS
HF Damp 200-8000 Hz,
BYPASS
Rate # 0.05-10.00 Hz
Depth 0-127
Phase 0-180 deg
Low Gain -15-+15 dB
High Gain -15-+15 dB
Balance # D100:0W-
D0:100W
Level 0-127
80
2-Band
L out
EQ
Balance W
Balance W
2-Band
R out
EQ
2-Band
L out
EQ
Balance W
Balance W
2-Band
R out
EQ
Description
Adjusts the time until the delay sound
is heard.
Adjusts the amount of the delay sound
that's fed back into the effect. Negative
(-) settings invert the phase.
Selects the way in which delay sound
is fed back into the effect (See the fig-
ures above.)
Adjusts the frequency above which
sound fed back to the effect is filtered
out. If you don't want to filter out any
high frequencies, set this parameter to
BYPASS.
Frequency of modulation
Depth of modulation
Spatial spread of the sound
Gain of the low frequency range
Gain of the high frequency range
Volume balance between the direct
sound (D) and the delay sound (W)
Output level
19: 3 TAP DELAY (Triple Tap Delay)
Produces three delay sounds; center, left and right.
fig.02-019m
L in
Left Tap
Triple Tap Delay
Feedback
Right Tap
R in
Parameter Value
Delay C 200-1000
ms, note *1
Delay L
Delay R
Feedback # -98-+98 %
HF Damp 200-8000
Hz, BYPASS
Delay C Level 0-127
Delay L Level
Delay R Level
Low Gain -15-+15 dB
High Gain -15-+15 dB
Balance # D100:0W-
D0:100W
Level 0-127
20: 4 TAP DELAY
This effect has four delays.
fig.02-020am
L in
Delay 1
Feedback
Quadruple Tap Delay
Delay 4
R in
fig.02-020bm
2 3
4
1
R
L
Stereo location of each delay
Parameter Value
Delay 1 200-1000
ms, note *1
Delay 2
Delay 3
Delay 4
Feedback # -98-+98 %
HF Damp 200-8000
Hz, BYPASS
Delay Level 1 0-127
Delay Level 2
Delay Level 3
Delay Level 4
Balance # D100:0W-
D0:100W
Level 0-127
Balance D
2-Band
L out
EQ
Balance W
Center Tap
Balance W
2-Band
R out
EQ
Balance D
Description
Adjusts the time until the delay sound is
heard.
Adjusts the amount of the delay sound that's
fed back into the effect. Negative (-) settings
invert the phase.
Adjusts the frequency above which sound
fed back to the effect is filtered out. If you do
not want to filter out any high frequencies,
set this parameter to BYPASS.
Volume of each delay
Gain of the low frequency range
Gain of the high frequency range
Volume balance between the direct sound
(D) and the delay sound (W)
Output level
(Quadruple Tap Delay)
Balance D
L out
Balance W
Delay 2
Delay 3
Balance W
R out
Balance D
Description
Adjusts the time until the delay sound is
heard.
Adjusts the amount of the delay sound that's
fed back into the effect. Negative (-) settings
invert the phase.
Adjusts the frequency above which sound
fed back to the effect is filtered out. If you do
not want to filter out any high frequencies,
set this parameter to BYPASS.
Volume of each delay
Volume balance between the direct sound
(D) and the delay sound (W)
Output level