Roland XV-5050 Owner's Manual page 133

3.
If the "Apple Talk" dialog box appears, click
[Turn It Off].
Then, in the dialog box that appears next, click [OK].
4.
The "Create a New Studio setup" dialog box
appears.
Click [OK].
5.
The "OMS Driver Search" dialog box appears.
Click [Search].
6.
After the search has been completed, make
sure that "Roland XV-5050" is listed in the
"OMS Driver Setup" dialog box, and click
[OK].
7.
After making sure that the XV-5050 is listed in
the "OMS MIDI Device Setup" dialog box,
click the check box for XV-5050, and click
[OK].
8.
Change the name of the keyboard icon to
"Port 1" or any other names except "XV-
5050."
9.
The "Save" dialog box appears.
Input the desired file name, and click [Save].
10.
Select [Test Studio] in the [Studio Menu] and
check it in order to verify whether sound is
produced.
11.
In the "My Studio Setup Window," click the
keyboard icon.
When you move the mouse pointer near the keyboard icon, the pointer will change
to the shape of an eighth note. Verify that you can hear sound from your XV-5050.
12.
After you have finished the above check, exit OMS Setup.
This completes driver settings.
Installing & Setup the Driver
If the "Create a New
Studio setup" dialog box
does not appear, click [New
Studio setup] in the [File]
menu.
The following step will
cause a relatively loud
sound to be produced by
the XV-5050, so turn down
the volume of your XV-
5050 before continuing.
133