Roland XV-5050 Owner's Manual page 83

29: DIST -> CHORUS
The parameters are essentially the same as in "26: OD -> CHORUS,"
with the exception of the following two.
OD Drive -> Dist Drive, OD Pan -> Dist Pan
fig.02-029m
L in
Balance D
Distortion Chorus
R in
Balance D
30: DIST -> FLANGER
The parameters are essentially the same as in "27: OD ->
FLANGER," with the exception of the following two.
OD Drive -> Dist Drive, OD Pan -> Dist Pan
fig.02-030m
L in
Distortion
R in
31: DIST -> DELAY
The parameters are essentially the same as in "28: OD -> DELAY,"
with the exception of the following two.
OD Drive -> Dist Drive, OD Pan -> Dist Pan
fig.02-031m
L in
Distortion
R in
32: ENH -> CHORUS
fig.02-032m
L in
Enhancer
Mix
R in
Enhancer
Mix
Parameter Value
Enhancer Sens # 0-127
Enhancer Mix 0-127
Cho Rate 0.05-10.00 Hz
Cho Depth 0-127
Cho Delay 0.0-100.0 ms
Cho Balance # D100:0W-
D0:100W
Level 0-127
L out
Balance W
Balance W
R out
Balance D
L out
Feedback
Balance W
Flanger
Balance W
R out
Balance D
L out
Balance D
Balance W
Delay
Balance W
Feedback
R out
Balance D
L out
Balance D
Balance W
Chorus
Balance W
R out
Balance D
Description
Sensitivity of the enhancer
Level of the overtones generated
by the enhancer
Frequency of modulation
Depth of modulation
Adjusts the time until the chorus
is heard.
Adjusts the volume balance be-
tween the sound sent through
the chorus (W) and the sound
that's not sent through the cho-
rus (D).
Output level
Chapter 4 Using the XV-5050 Effects
33: ENH -> FLANGER
fig.02-033m
L in
Enhancer
Mix
R in
Enhancer
Mix
Parameter Value
Enhancer Sens # 0-127
Enhancer Mix 0-127
Flg Rate 0.05-10.00 Hz
Flg Depth 0-127
Flg Feedback -98-+98 %
Flg Delay 0.0-100.0 ms
Flg Balance # D100:0W-
D0:100W
Level 0-127
34: ENH -> DELAY
fig.02-034m
L in
Enhancer
Mix
R in
Enhancer
Mix
Parameter Value
Enhancer Sens # 0-127
Enhancer Mix 0-127
Delay Time 0.0-500.0 ms
Dly Feedback -98-+98 %
Dly HF Damp 200-8000 Hz,
BYPASS
Dly Balance # D100:0W-
D0:100W
Level 0-127
Balance D
L out
Feedback
Balance W
Flanger
Balance W
R out
Balance D
Description
Sensitivity of the enhancer
Level of the overtones generated
by the enhancer
Frequency of modulation
Depth of modulation
Adjusts the amount of the
flanger sound that's fed back
into the effect. Negative (-) set-
tings invert the phase.
Adjusts the time until the flanger
is heard.
Adjusts the volume balance be-
tween the sound sent through
the flanger (W) and the sound
that's not sent through the
flanger (D).
Output level
L out
Balance D
Balance W
Delay
Balance W
Feedback
R out
Balance D
Description
Sensitivity of the enhancer
Level of the overtones generat-
ed by the enhancer
Adjusts the time until the delay
is heard.
Adjusts the amount of the de-
lay sound that's fed back into
the effect. Negative (-) settings
will invert the phase.
Adjusts the frequency above
which sound fed back to the ef-
fect is filtered out. If you don't
want to filter out any high fre-
quencies, set this parameter to
BYPASS.
Adjusts the volume balance be-
tween the sound sent through
the delay (W) and the sound
that's not sent through the de-
lay (D).
Output level
83