Advertisement
User Manual EtherNet/IP / J1939 - Converter
Document code: MN67599_ENG
Revision 1.100
Page 10 of 28
Industrial Electronic Devices
ETHERNET/IP:
The EtherNet/IP connection must be made using Connector3 and/or Connector4 of
HD67599-A1 with at least a Category 5E cable. The maximum length of the cable
should not exceed 100m. The cable has to conform to the T568 norms relative to
connections in cat.5 up to 100 Mbps. To connect the device to an Hub/Switch is
recommended the use of a straight cable, to connect the device to a PC/PLC/other is
recommended the use of a cross cable.
ADFweb.com S.r.l.
Advertisement
Need help?
Do you have a question about the HD67599-A1 and is the answer not in the manual?
Questions and answers