Safety; General Safety Regulations And Obligations; Intended Use; Reasonably Foreseeable Misuse - LOGICDATA DYNAMIC MOTION System Manual

2 SAFETY

2.1 GENERAL SAFETY REGULATIONS
In general, the following safety regulations and obligations apply when handling the product:
• Do not operate the DYNAMIC MOTION system unless it is in a clean and perfect condition
• Do not remove, change, bridge, or bypass any protection, safety, or monitoring equipment
• Do not convert or modify any components without written approval from LOGICDATA
• In the event of malfunction or damage, any faulty components must be replaced immediately
• Unauthorized repairs are prohibited
• Do not attempt to replace hardware unless the system is in a de-energized state
• Only skilled persons are allowed to work on the Table System
• Ensure that national worker protection conditions and national safety and accident prevention reg-
ulations are observed during operation of the system

2.2 INTENDED USE

The DYNAMIC MOTION system is a group of products intended to operate electrically Height-Adjustable
Tables. It is intended for indoor use only. The system may only be installed in compatible Height-Adjustable
Tables and with LOGICDATA-approved accessories. Contact LOGICDATA for further details. Use beyond or
outside the intended use will void the product's warranty. Please refer to the Operating Manual of each prod-
uct in the DYNAMIC MOTION system to determine its individual intended use.

2.3 REASONABLY FORESEEABLE MISUSE

Usage outside of the intended use for each product could lead to minor injuries, serious injuries, or even
death. Reasonably foreseeable misuse of the system includes, but does not extend to:
• Using the system as a climbing or lifting aid for people or animals
• Connecting unauthorized products to the Table System. If you are unsure as to whether a product
can be used with the system, contact LOGICDATA for further information
• Overloading the Table System

2.4 EXPLANATION OF SYMBOLS AND SIGNAL WORDS

Safety notices contain both symbols and signal words. The signal word indicates the severity of the hazard.
Indicates a hazardous situation which, if not avoided, will result in death or serious
DANGER
injury.
Indicates a hazardous situation which, if not avoided, could result in death or serious
WARNING
injury.
Indicates a hazardous situation which, if not avoided, could result in minor or moder-
CAUTION
ate injury.
Indicates a situation which, if not avoided, could result in damage to the product
NOTICE
through electrostatic discharge (ESD).
Indicates a situation that will not lead to personal injury, but could lead to damage to
NOTICE
the device or the environment.
Indicates the protection class of a device: Protection Class III.
INFO
Protection Class III devices may only be connected to SELV or PELV power sources.
INFO
Indicates important tips for handling the product.
DYNAMIC MOTION SYSTEM - SYSTEM MANUAL // PAGE 6