Interval Configuration - Nortel CC MIS Getting Started Manual

CC MIS
CC MIS
Reports
Release 5.2
Data Selections:
This area defines ranges for data elements of the report format. For each
field, you can select one of the following: All, Range, or defined lists (in ap-
plicable key fields). Interval and other time frame fields will also contain the
Current and Previous selections.
Note: To select the previous time frame (such as day), you can select Previ-
ous rather than selecting Range then entering a -1.
Supervisor Scope- This field identifies the supervisor scope restriction to be
used for the report.
Node - On a NAP partition, the Node field is used to restrict a report to a
specific node. The values for the field are selected from the pulldown menu.
(This field is not displayed on local partitions.)

Interval Configuration

Intervals for each hour of the day are configured in the Maintenance Inter-
face. The intervals used by your partition can be viewed while in the Report
Parameters Definition window by selecting the Reports / Intervals com-
mand. The Interval Configuration dialog is displayed.
CC MIS Getting Started Guide (297-2671-175) Page 9-7