Defining A Wallboard Message - Nortel CC MIS Getting Started Manual

CC MIS
CC MIS
Wallboard Messages

Defining a wallboard message

Use the following steps to define a wallboard message.
steps
Defining a wallboard message
Page 7-4
1. Select Displays/Wallboard Messages from the
CC MIS Main window. The Wallboard Message
Definition screen is displayed.
2. Define the message:
a. At the Wallboard Message Definition window, access the Message Text
box.
b. Enter the message to appear on the wallboard. Enter variables as a
number between 1 and 5, surrounded by <>. (Example: Service Level
<1> )
c. Specify the desired display format characteristics: color, style, and
display format.
d. Click on the tab for variable choices (to define variables entered in
message). Complete the variable information in the tab area.
e. For the variable, click on the down arrow in the Display Format box.
Highlight your choice.
3. Save the definition:
a. At the Wallboard Message Definition window, select File / Save.
b. If the definition exists already, and you wish to update the definition,
click OK on the information box.
Note: CC MIS allows you to save multiple wallboard messages with the same
name. If you are modifying an existing wallboard message, save the modification
by using the Save command to prevent the system from saving different wallboard
message definitions with the same name.
4. Exit the screen by selecting File / Exit.
The system returns to the main window.
Release 5.2
CC MIS Getting Started Guide (297-2671-175)