Logging Into Cc Mis; Logging In - Nortel CC MIS Getting Started Manual

Release 5.2

Logging into CC MIS

Introduction
This chapter provides information on logging in and out of CC MIS.
A key step in learning to use CC MIS is learning how to log in and log out of
the supervisor terminal.

Logging in

Supervisors with profiles established in CC MIS can log in to any supervisor
position. Only one session per supervisor ID can run at a time. If you are
logged into one position and you try to log in at a different position, you
must either override your original login, causing the CC MIS system to log
you out of the original session; or cancel your login attempt and return to the
position at which you are already logged in. The steps below guide you
through the login onto the CC MIS terminal.
steps
This is a sample icon.
The name of the icon on
your desktop or program
group may be
different from this
sample.
The steps are explained in detail in the paragraphs that follow.
CC MIS Getting Started Guide (297-2671-175)
Logging in to CC MIS
Starting from your desktop or program group,
1. Double-click on the CC MIS icon.
2. Then, from the CC MIS Main window, click on
Session and select Login.
3. The Login window appears.
4. Enter your supervisor ID [and password if
required].
5. Identify your preferences, then click on the
OK button.
CC MIS
CC MIS
Logging into CC MIS
3
3
Page 3-1