Step 2: Defining Quadrants - Nortel CC MIS Getting Started Manual

Release 5.2

Step 2: Defining quadrants

In this step, you define the way the information will be presented in a quad-
rant. There are two quadrant sizes: full and half screen. There are two types
of layout: tabular and graphic.
You have the option of using public quadrants, defined by system adminis-
trators, or using your own quadrants. When you create your own quadrant,
it can be saved as personal or public.
You can define a total of five personal quadrants.
Defining tabular quadrants
Tabular quadrants are defined using the Quadrant Definition window. The
window is displayed by selecting the Displays / Quadrants option from the
CC MIS Main window.
The Quadrant Definition window is shown in the figure below.
Quadrant Defintion
display (Tabular)
The lower portion of the screen contains standard formulas. It is recom-
mended that you select a standard quadrant then modify its values and titles
as desired. To edit, click on the Edit Heading and Edit Threshold buttons to
the left of the list.
Refer to the CC MIS Online Help for descriptions of the fields on the Quad-
rant Definition window.
CC MIS Getting Started Guide (297-2671-175)
CC MIS
CC MIS
Queue Statistics Display
Page 6-5