Lockly SECURE PRO LATCH EDITION Installation Manual page 14

Step 6
Do not mount (install) door sensors yet. You will install in step 9.
About door sensors
Door sensors provide real-time door condition status, such as the ability to verify if the door
is securely closed. It also sends push notifications to your phone whenever your door opens
and enables voice control with Amazon Alexa or Hey Google.
Lockly Secure Pro comes with a pre-wired door sensors consisting of two parts:
Part (AA) - Wired Sensor
Lockly door sensors comes in Grey (PGA063) and Matte Black (PGA064) that
TIP：
can be ordered through our customer hotline: (669) 500-8835 or by email:
help@Lockly.com.
Removal of Sensor (optional)
There may be circumstances where the sensor cannot be installed because of molding/door
limitations or is not aesthetically desirable. The sensor wired to the lock is removable by carefully
pulling its connector from the circuit board. If removed, some features and functionality will
not be available, such as real-time condition status.
When installed on door, the distance between the wired sensor and
sensor magnet must be less than 3/4" in order for the sensor to work.
If door frame is higher than door, add included foam pads to level
parts (AA) and (AB) with each other as much as possible.
PREPARING DOOR SENSOR FOR INSTALLATION
Part (AB) - Sensor Magnet
13