Advertisement
Quick Links
Advertisement
Related Manuals for Lockly Satin Nickel Secure Plus Smart Lock Deadbols
Summary of Contents for Lockly Satin Nickel Secure Plus Smart Lock Deadbols
- Page 1 SECURE INSTALLATION GUIDE DEADBOLT EDITION...
- Page 2 Go to Lockly.com/installation to watch a video version of this installation guide. Download the BILT app from the App Store or on Google Play for step-by-step interactive 3-D walk-through installation instructions.
- Page 3 Lockly Secure up and running. ® Installation generally takes less than 30 minutes. If you have any questions please reference our online sup- port at: Lockly.com/support or call (669) 500-8835 for help. Reference installation parts overview foldout on back page...
- Page 4 Preparation To complete installation, you would need the following: Phillips Screwdriver Tape measure or ruler Prepare door and remove existing lock. If necessary, use provided Installation Template to prepare door. 2-⅜" (60mm) or 2-¾" (70mm) 1-⅜" (35mm) to 2" (50mm) *Optional 1"...
- Page 5 Step 1 ADJUST DEADBOLT AND INSTALL 1: Deadbolt slot must align to the center of the door hole. Adjust as shown if needed. 2-3/4" (70mm) or 2-3/8” (60mm) The deadbolt comes set to 2-3/4" (70mm). Adjust length to 2-3/8” (60mm) if necessary. (wear gloves to protect from possible pinching).
- Page 6 Step 1 ADJUST DEADBOLT AND INSTALL continued 2: Extend the deadbolt by inserting a 3: Insert the deadbolt into door edge flat-head screwdriver into the slot and hole, make sure that the right side is up turning clockwise. and the slot is in the vertical position. Secure with 2 screws.
- Page 7 Step 2 INSTALLING THE EXTERIOR ASSEMBLY 1: To secure Exterior Assembly of lock, peel the cover off the adhesive strips Peel paper off the Adhesive tape *This hole (O) is for the optional Slotted Barrel Extension provided for stabilizing your lock. It will require drilling extra hole on your door (See template as provided).
- Page 8 Step 3 INSTALLING THE INTERIOR ASSEMBLY (F) 1: Check interior mounting plate (K) 2: Align and secure mounting plate with alignment to your door hole before adhesive strips. Guide connection cables securing with adhesive strips. through the hole and secure to the lower left notched hole.
- Page 9 Step 3 Step 3 INSTALLING THE INTERIOR ASSEMBLY (F) INSTALLING THE INTERIOR ASSEMBLY (F) continued continued 5: Plug the cable coming through mounting plate into the interior assembly shown. Tuck cable under eyelet hooks and route to the right on interior assembly Plug into , match red side...
- Page 10 Step 3 INSTALLING THE INTERIOR ASSEMBLY (F) continued Torque Blade Thumb turn shaft Align torque blade with thumb turn shaft, make sure both are in the vertical position. 6: Before placing the 7: Place the interior assembly 8: Secure the interior assem- interior assembly onto the against the mounting plate bly to mounting plate with...
-
Page 11: Installing Batteries
Step 4 INSTALLING BATTERIES PRESS & HOLD 1: With door open and deadbolt fully extended, place ribbon inside compartment and insert 4 batteries (note correct -/+ polarity). 2: After all batteries are installed, PRESS and HOLD the program button for 10S. The lock will automatically start self-check (release program button once check starts). - Page 12 Step 5 INSTALLATING DOOR STRIKE Use the supplied door strike or use your existing as long as deadbolt operates smoothly without binding or catching. K(2X) IMPORTANT: because doors and frames vary in design it may be necessary to make slight adjustments to your strike plate and/or dust box in order to ensure smooth deadbolt operation.
- Page 13 Step 6 ® DOWNLOAD LOCKLY Congratulations! You have completed the Lockly Secure physical lock installation. To complete your setup, download the Lockly app from the App Store or on Google Play and follow on-screen instructions. Scan or visit Lockly.com/app...
- Page 14 Add more Smart to your Home Secure Link Wi-Fi Hub Add the optional Lockly Secure Link Wi-Fi Hub, together with the free Lockly app, it's easier than ever to securely control and manage your door from anywhere, anytime. Real-time, monitoring, & status...
- Page 15 FCC Warning： This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
- Page 16 Interior Assembly PM5×60mm Screw Battery Cover PM4*12MM Screw Deadbolt KA4*20MM Screw Strike Plate Dust Box Activation Card LOCK SERIAL PGDXXXXXXXXXXXXXXXX ACTIVATION CODE XXXXXXXX SCAN & SAVE Lockly Secure can be fitted for both right swing doors and left swing doors. ®...
- Page 17 Connect with us @meetLockly | #Lockly Reference installation parts overview foldout.
- Page 18 Bluetooth SIG, Inc. , and ® any use of such marks by Lockly is under license. Other trademarks and trade names are those of their respective owners. Google, Android, Google Play and Google Home are trademarks of Google LLC. , Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc., or its affiliates.