Bearings On Chest Press / Chest Incline Levers Are Damaging; Cable Slip Off On Leg Press Pulley - Technogym Selection M810 Service Maintenance Manual

SELECTION LINE: Service & Maintenance Manual - rev. 4.0
5.18. BEARINGS ON CHEST PRESS / CHEST INCLINE LEVERS
ARE DAMAGING
To correct some reliability problems affecting Chest Press lever bearings, a modification has been
made to the bearings, shafts and levers. Please refer to the exploded machine drawings for details of
the modification.
The first machine produced that incorporates this new solution has code:

Chest Press: M865A05000017

Chest Incline: M870A05000006
For already-installed machines there is an upgrade kit available that allows implementation of this
new technical solution without having to replace the levers, but only the bearings and shafts. The
order code of this kit is H0003200AA.

5.19. CABLE SLIP OFF ON LEG PRESS PULLEY

To prevent the cable slipping off the pulleys situated underneath the platform, a modification has
been made consisting of the plate 1 (0C8220AA) on which the pulleys are fixed, with the 2 bars 2
(0D002465AA) attached that prevent the cable from slipping off.
The first machine produced with this modification has SN M851A04001073.
Page 5.33