Initial Set Mode; Other! Functions Sisi Iiivecssccrsessescocesovecstcucteszverescunetsscsstunecsreneeeeeene - Icom IC-T2H Instruction Manual

Tae 2
Mg 10 OTHER FUNCTIONS
@ Initial set mode AT POWER ON
Initial set mode is accessed at power on and allows you to
set seldom-changed settings. In this way you can "customize"
transceiver operations to suit your preferences and operating
style.
© Entering initial set mode
@ While pushing [8] + [0], rotate [PWR] to turn power on.
¢ The transceiver enters initial set mode and "mS SlmP" or "mS
noRm'" (see right) is displayed.
@ Push [ 4] one or more times to select the desired display
as described on the following pages.
@ Push [A]/[¥V] to select the desired condition.
@ Turn power off, then on again to exit initial set mode and
select the previous operating mode.
© Message
When no operation is performed for 5 sec. in initial set mode,
a message scrolls across the function display prompting you
for input.
[-] Message example
(ES Dag omelet ona
JEE mm wo S wr Le
for microphone simple mode
© Mic simple mode (Optional HM-75A required)
This item turns the microphone simple
mode on or off. Microphone simple nS S ta
mode is used to change the function
assignments for switches on the op-
tional HM-75A REMOTE CONTROL MI-
CROPHONE as below. This assignment
is convenient for 3-channel use of
simple operation.
latin] ™ [San] =
eau] wou [wou | tai | tai [rar]
nt wou [Ree fea] wou [wou | oS
Five [ Ue wore] won| woror] ZA
jeownoonnownijucnoe wort cna] C7
"Functions only when in conversation mode.
NOTE: {
Turn power off when connecting the HM-75A to the trans-
ceiver.
OO y
VFO mode cannot be selected via the microphone when
SIMPLE mode is selected.