Cee Eee Ee; Memory/Call Programming; Eee; Programming A Memory Channel - Icom IC-T2H Instruction Manual

Rese seas
MEMORY/CALL PROGRAMMING 6 ee
@ General
The transceiver has 40 memory channels (plus 1 pair of scan
edge channels and 1 call channel) for storage of often-used
frequencies. In addition, the USA version has 10 marine
weather channels (however, these are not programmable).
© Memory/call channel contents
The following information can be programmed into mem-
ory/call channels:
¢ Operating frequency
¢ Duplex direction (DUP or —-DUP) with an offset frequency
(pgs. 15, 16)
e Subaudible tone encoder or tone squelch on/off (pgs. 15,
26)
¢ Subaudible tone and tone squelch frequencies (pgs. 15, 26)
¢ Skip information" (p. 25)
*Except for scan edge memory channels.
—@ Programming a memory
channel
@ Push [a V] to select VFO mode, if
necessary. ms CLI PO
ee ee |
@ Push 6 digit keys to enter the desired frequency.
@ Push [DUP], [c T], etc. to set other =r
j j 7 ik rar
information as desired. sary
@® Push [p M], then select a memory eee
Pari (Lei ot
channel number with [A]/[¥]. pit 'DO
I
© Push [B M] for 1 sec. to program
the information into the channel
and return to VFO.