Eee - Icom IC-T2H Instruction Manual

@DIMF USING INITIAL SET MODE
transmission speed
When slow DTMF transmission speeds are required (as for
some repeaters), the transceiver's rate of DTMF transmission
can be adjusted.
® While pushing [8] + [0], turn power on to enter initial set
mode.
@ Push [ 4] one or more times until
@ Push [A]/[¥] to select the desired
DTMF transmission speed. Fastest
¢ Four speeds are available: "100" (100
msec. intervals) is the fastest; "500"
(500 msec. intervals) is the slowest.
@ Turn power off, then on again to siqwest
exit initial set mode.
DTMF MEMORY /