Supplied Accessories - Icom IC-T2H Instruction Manual

DO NOT push the PTT when not actually desiring to trans-
mit.
Place unit in a secure place to avoid inadvertent use by chil-
dren.
DO NOT operate the transceiver near unshielded electri-
cal blasting caps or in an explosive atmosphere.
AVOID using or placing the transceiver in direct sunlight or
in areas with temperatures below —10°C (+14°F) or above
460°C (+140°F).
The use of non-lcom battery packs/chargers may impair
transceiver performance and invalidate the warranty.
Even when the transceiver power is OFF, a slight current still
flows in the circuits. Remove the battery pack or case from
the transceiver when not using it for a long time. Otherwise,
the battery pack or installed Ni-Cd batteries will become ex-
hausted.
For USA only:
Caution: Changes or modifications to this transceiver, not ex-
pressly approved by Icom Inc., could void your authority to
operate this transceiver under FCC regulations.
SUPPLIED ACCESSORIES
Accessories included with the transceiver:
CPAntehina teak, abt FD. die, Dib. (POR MOBES AAS INT 1
SUG WOMPPNTTEM ce ee ects ees eens 1
@ Battery case (BP-194)
with 8 Ni-Cd (AA) batteries* installed ............... 1
Wall Charger tenth inn ele cree « SYRA MMS Pot) Ml 1
*Not supplied with some versions.