Oracle Roving Edge Device Setup Manual page 5

Setting Up Oracle Roving Edge Device
No. Item
2
One of the following:
• Ruggedized case
• Rack mounting kit with the following items:
• Two mounting brackets inside two slide-rails
• 4 M4 screws
3
USB-to-DB-9 serial cable
For devices with ruggedized cases, the cable is in a pouch inside the rear of the case.
4
AC power cord
For devices with ruggedized cases, the power cord is in a pouch inside the rear of the case.
Roving Edge Device Rear Panel
Use the following illustration to familiarize yourself with the Roving Edge Device.
Note:
If your device is in a ruggedized case, you can view the rear panel after you
removed the case end-caps, described in
Caps
No. Description
1 Reserved Ethernet port. Don't use.
2
Ethernet ports 2 (left) and 1 (right) *. Can optionally be used for network bonding.
2 Ethernet port 0 is used to connect to your network *.
3 Power receptacle
4
System status LED
• On – Critical event occurred
• Off – Normal
5 Reset button
Oracle Cloud Infrastructure Roving Edge Device Setup Guide
on page 6.
Remove the Ruggedized Case End-
5