Device Description; Connections Und Led; Operating And Error Displays - Bosch rexroth IndraControl SafeLogic compact Operating Instructions Manual

IndraControl SafeLogic compact Sercos
Gateway
"Rexroth IndraControl SafeLogic compact Designer Software" (see
lated documents" on page
The SafeLogic Designer software with at least version V1.4.0 is re-
●
quired for configuration and commissioning.
The SafeLogic compact system does not have to be reconfigured
●
after a module has been replaced as the configuration is saved on
the SafeLogic flash drive.

12 Device description

The SafeLogic compact Sercos Gateway SLC-3-GS3S00300 allows to transfer
safety-relevant data between the safe compact small control SafeLogic compact
(SLc) and the CIP Safety on Sercos devices. The SafeLogic compact Sercos
Gateway supports Sercos in the third generation.

12.1 Connections und LED

Fig. 12-1: Connections and LED

12.2 Operating and error displays

The meanings of the LED displays are listed in the following tables:
2).
RJ 45 Sercos socket (XFE1)
LED "Network activity for XFE1"
LED "Module status"
LED "Status of CIP Safety originator"
LED "Status of CIP Safety network"
LED "Status of Sercos communication"
LED "Network activity for XFE2"
RJ-45 Sercos socket (XFE2)
R911338431_Edition 04 Bosch Rexroth AG
19/27
Device description
tab. 1-2 "Re-