Bosch Rexroth AG
Device description
"Rexroth IndraControl SafeLogic compact Designer Software" (see
"Required and supplementing documentation" on page
The SafeLogic Designer software with at least version V1.4.0 is
●
required for configuration and commissioning.
The SafeLogic compact system does not have to be reconfigured
●
after a module has been replaced as the configuration is saved on
the SafeLogic flash drive.
12 Device description
The SafeLogic compact Sercos Gateway SLC-3-GS3S00300 allows to transfer
safety-relevant data between the safe compact small control SafeLogic compact
(SLc) and the CIP Safety on Sercos devices. The SafeLogic compact Sercos
Gateway supports Sercos in the third generation.
12.1 Connections und LED
Fig. 12-1: Connections and LED
12.2 Operating and error displays
The meanings of the LED displays are listed in the following tables:
20/31
2).
RJ 45 Sercos socket (XFE1)
LED "Network activity for XFE1"
LED "Module status"
LED "Status of CIP Safety originator"
LED "Status of CIP Safety network"
LED "Status of Sercos communication"
LED "Network activity for XFE2"
RJ-45 Sercos socket (XFE2)
DOK-CONTRL -SLC*GW*GS3S-IT03-EN-P
Sercos Gateway
tab. 1-2