HP xw9400 Service And Technical Reference Manual page 74

6. Dislodge the metal clip from the chassis by rocking the power button back and forth. Then slide
the power button assembly (2) out from the front of the chassis.
Figure 4-10
To remove the speaker:
1. Disconnect the speaker cable from the in-line front panel I/O device assembly cable, if you have
not already done so.
2. Slide the speaker away from the three flanges and remove it from the chassis.
Figure 4-11
66 Chapter 4 Removal and replacement procedures
Removing the power button assembly
Removing the speaker
ENWW