Appendix E Power Cord Set Requirements - HP xw9400 Service And Technical Reference Manual

Hp xw9400: reference guide
Hide thumbs Also See for xw9400:
Table of Contents

Advertisement

E
Power cord set requirements
The power cord set (flexible cord or wall plug) received with this product meets the requirements for use
in the country where you purchased the equipment.
If you must obtain a power cord for a different country, purchase a power cord that is approved for use
in that country.
The power cord must be rated for the product and for the voltage and current marked on the product's
electrical ratings label. The voltage and current rating of the cord should be greater than the voltage and
current rating marked on the product. The length of the cord must be between 1.8 m (6 feet) and 3.6 m
(12 feet). If you have questions about the type of power cord to use, contact an HP authorized service
provider.
Route the power cord so that it is not likely to be walked on or pinched by items placed on it or against
it. Pay particular attention to the plug, electrical outlet, and the point where the cord exits from the
product.
NOTE
capable (minimum) power cord with a 220V power source.
ENWW
Use a 15 A-capable (minimum) power cord with a 110V power source. Use a 10 A-
165

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents