Dual-State Power Button; Worldwide Web Site - HP xw9400 Service And Technical Reference Manual

Hp xw9400: reference guide
Hide thumbs Also See for xw9400:
Table of Contents

Advertisement

NOTE
workstation and press and hold the
If you are using a PS/2 keyboard, disregard the keyboard error message that might appear.
5.
Insert the diskette or USB.
6.
Click File>Replicated Setup>Save to Removable Media. Follow the instructions on the screen
to create the configuration diskette or USB.
7.
Download a BIOS utility for replicating setup (repset.exe), and copy it onto the configuration diskette
or USB. To obtain this utility, go to
the workstation.
8.
On the configuration diskette or USB, create an autoexec.bat file containing the following
command: repset.exe cpqsetup.txt.
9.
Power off the workstation to be configured. Insert the configuration diskette or USB and power on
the workstation. The configuration utility runs automatically.
10.
Restart the workstation when the configuration is complete.

Dual-state power button

With ACPI enabled, the power button can function either as an on/off switch or as a sleep button. The
feature does not completely remove the power, but instead causes the workstation to enter a low-power
standby state. This feature enables you to power off without closing applications and to return to the
same operational state without any data loss.
To change the power button configuration:
1.
Click Start, and select Control Panel>Power Options.
2.
In Power Options Properties, click the Advanced tab.
3.
In the Power Button section, select Hibernate or Standby. (Hibernate must be enabled in the
Hibernate tab to use this option.)
After configuring the power button to function as a Hibernate/Standby button, press the power button
to put the system in a very low power state. Press the button again to bring the system to full power
status.
To completely remove all power to the system, press and hold the power button for four seconds.
CAUTION
responding. Powering off the power without operating system interaction can cause damage to
or loss of data on the hard drive.

Worldwide web site

HP engineers rigorously test and debug software developed by HP and third-party suppliers, and
develop operating system specific support software, to ensure performance, compatibility, and reliability
for HP workstations.
When making the transition to new or revised operating systems, it is important to implement the support
software designed for that operating system. If you plan to run a version of Microsoft Windows that is
40
Chapter 3 System management
If you do not press the F10 key at the appropriate time, you must restart the
http://www.hp.com/support/files
Do not use the power button to power off the workstation unless the system is not
F10
key again to access the utility.
and enter the model number of
ENWW

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents