Clearing Passwords; Hood Sensor (Smart Cover Sensor); Setting The Hood Sensor Protection Level - HP xw9400 Service And Technical Reference Manual

Table 3-4 National keyboard delimiter characters (continued)
Arabic
Czech
Danish
French
French
Canadian
German
* For Bosnia-Herzegovina, Croatia, Slovenia, and Yugoslavia.

Clearing passwords

If you forget your password, you cannot access the workstation. See
on page 176

Hood sensor (Smart Cover Sensor)

The optional hood sensor is a combination of hardware and software technology that can alert you when
the workstation side access panel has been removed. There are three levels of protection, as described
in the following table.
Table 3-5 Hood sensor protection levels
Level
Level 0
Level 1
Level 2
These settings can be changed using the Computer Setup Utility.

Setting the hood sensor protection level

To set the hood sensor protection level:
1. Power on or restart the workstation.
2. As soon as the screen illuminates, press and hold the
Utility. Press
NOTE
computer and press and hold the
If you are using a PS/2 keyboard, disregard the keyboard error message that might appear.
46 Chapter 3 System management
/ Greek
- Korean
- Latin American
! Norwegian
é Polish
- Portuguese
for instructions on clearing passwords.
Setting
Disabled
Notify User
Setup Password
Enter to bypass the title screen, if necessary.
If you do not press the F10 key at the appropriate time, you must restart the
- Russian
/ Taiwanese
- Thai
- Turkish
- U.K. English
- U.S. English
Description
Hood sensor is disabled (default).
When the workstation is restarted, the screen displays
a message indicating that the workstation side access
panel has been removed.
When the workstation is restarted, the screen displays
a message indicating that the workstation side access
panel has been removed. You must enter the setup
password to continue.
F10 key until you enter the Computer Setup
F10 key again to access the utility.
/
/
/
.
/
/
Resetting the password jumper
ENWW