Pci Card Slot Power Specification - HP xw9400 Service And Technical Reference Manual

Hp xw9400: reference guide
Hide thumbs Also See for xw9400:
Table of Contents

Advertisement

Table 1-10
Environmental Specifications (continued)
Temperature (non-operating)
Humidity (operating)
Humidity (non-operating)
Maximum Altitude (operating)
Maximum Altitude (non-operating)
Shock (operating)
Shock (non-operating)
Vibration (operating)
Vibration (non-operating)
* Operating temperature is specified at 5° to 35° C from sea level to 5000 ft. with an altitude derating
of 1.0° C per every 300 m (1000 ft.) above 5000 ft. to a maximum of 3000 m (10,000 ft.), no direct
sustained sunlight. Maximum rate of change is 10° C/Hr. The upper limit may be limited by the type
and number of options installed.

PCI card slot power specification

Table 1-11
PCI and PCI Express slot power specifications
* In addition to these slot power specifications, the overall power consumption of the system (including
I/O cards, processor, and memory) must not exceed the maximum ratings of the system power
supply. See
** Includes 75 W maximum from the system board connector, and 75 W maximum from the auxiliary
graphics power connector.
10
Chapter 1 Product overview
Slot#
1
PCI Express x16 (x8)
2
PCI Express x16 graphics
3
PCI 32 bit, 33 MHz
4
PCI Express x16 (x8)
5
PCI Express x16 graphics
6
PCI-X 100
7
PCI-X 100/133
Power supply specifications on page 7
-40° to 140° F (-40° to 60° C)
8% to 85% RH, non-condensing
8% to 90% RH, non-condensing
0 to 10,000 ft. (3,048 m)
0 to 30,000 ft. (9,144 m)
1/2-sine: 40 G, 2–3 ms
1/2-sine: 160 cm/s, 2−3 ms, (approximately 100 G)
square: 605 cm/s, 30 G
NOTE
Values represent individual shock events and
are not indicative of repetitive shock events.
Operating random: 0.5 G (rms), 5−300 Hz
Random: 2.0 G (rms), 10−500 Hz
NOTE
Values are not indicative of continuous
vibration.
Slot Type
for details.
Slot Power (Maximum)
25 W*
150 W**
25 W*
25 W*
150 W**
25 W*
25 W*
ENWW

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents