Bezel Blanks - HP xw9400 Service And Technical Reference Manual

Figure 4-6

Bezel blanks

To remove the bezel blanks:
1. Disconnect power from the system, (
panel, and remove the front bezel
2. Remove the bezel blanks by squeezing in on the tabs (1) and pulling in the bezel blanks (2).
Figure 4-7
ENWW
Opening the front bezel
Removing the bezel blanks
Pre-disassembly procedures on page
(Front bezel on page 62)
Removing and replacing components
55), remove the access
63