Installing The Accessory Software Under Windows 95; Installing The Cd-Rom Driver; Installing The Sound Board Drivers - HP Kayak XA Installation Manual

1 Installing Your Multimedia Sound Kit

Installing the Accessory Software under Windows 95

Installing the Accessory Software under Windows 95
If you are running Windows 95, you need to install the accessory
software as described here.

Installing the CD-ROM Driver

Windows 95 automatically detects the CD-ROM drive and loads the
required software driver when you switch on your PC.

Installing the Sound Board Drivers

To install the sound board drivers, complete the following steps:
1 Switch on your PC. Windows 95 automatically detects the sound
board and displays the New Hardware Found dialog box.
2 Insert the HP Multimedia Sound CD in the CD-ROM drive. (Insert
the CD label side up; press the open/close pushbutton to open and
close the drawer.)
3 With "Driver from disk provided by hardware manufacturer"
selected, click on the OK button.
4 Locate the Windows 95 driver setup program on the CD-ROM. It is in
the directory d:\win95.
(The CD-ROM drive may be your E drive. In this case you would go
to e:\win95.)
5 Start the setup program and follow any instructions that are
displayed on the screen.
4 English