Connecting The Power Cords - HP Vectra XA 6/xxx User Manual

Display
Power Cord
WARNING
1 Setting Up and Using Your PC

Connecting the Power Cords

Connecting the Power Cords
1 If fitted, remove the label covering the computer's power connector.
2 Connect the power cords to the display and the computer. (The
connectors are shaped to go in one way only.)
3 Connect the display's power cord and the computer's power cord to
a grounded outlet.
For your safety, always connect the equipment to a grounded wall
outlet. Always use a power cord with a properly grounded plug, such
as the one provided with this equipment, or one in compliance with
your national regulations.
This PC is disconnected from the power by removing the power cord
from the power outlet. This means the PC must be located close to a
power outlet that is easily accessible.
6 English
Computer
Power Cord
Grounded Outlet