Replace The Cover - HP Kayak XA05 User Manual

ashaki.bk : ashak-3.fb4 Page 35 Wednesday, July 15, 1998 6:13 PM
LCD Error Messages
- Check all internal cables.
- Check that the status panel is correctly
connected to the system board
Power CPU Check that the processor is correctly
installed.
CPU error Reset the PC Workstation or power-off
the LAN.
No RAM, RAM type Check that the memory modules are
correctly installed.
- Check that accessory boards are firmly
seated in their slots.
- Verify that any switches and jumpers
on the accessory boards are properly
set.
- Check that the switches on the system
board are properly set.
Temp disk, Temp CPU, Check fans and that air flow guide is
Temp IO slot not blocked.
Fan CPU, Fan IO slot Check that fans are installed correctly.
Power/Power supply Check that power supply is properly
connected.
No video Check that the video card is properly
installed.

4 Replace the cover.

5 Reconnect all cables and power cords.
6 Turn on the display and computer.
3 Troubleshooting Your HP PC Workstation
If Your PC Workstation Does Not Start Properly
Action
Ensure they are correctly attached and
firmly in place.
Ensure that both connectors are
correctly attached and firmly in place.
Ensure it is firmly in place.
Refer to "The MaxiLife Control Panel"
on page 10.
Refer to "Installing Memory" in the
Upgrade and Configuration Guide.
Refer to "Installing Accessory Boards"
in the Upgrade and Configuration
Guide.
Refer to the manuals that came with
each board.
Refer to "System Board Switches" in
the Upgrade and Configuration Guide.
Refer to "Replacing the Power Supply
after Installing Accessories" on page 24
Refer to the manual that came with
the video card.
Reference
-
-
English 35