Lift the front of the
power supply up
and forwards.
WARNING
HP Kayak XA-s 02xx PC Workstation - Installing Accessories In Your HP Desktop PC Workstation
Moving the Power Supply
You can move the power supply unit out of the computer to improve
access to the system board and the cables at the rear of the disk
drives.
1 Disconnect the computer's power cord and any telecommunications
cable.
2 Remove the computer's cover (refer to page 3).
3 Lift the front of the power supply up and move it forwards to
disengage the hinge on the rear.
4 Rotate the power supply and lay it upside down on the drive unit.
To avoid electrical shock, do not open the power supply. There are no
user-serviceable parts inside the power supply unit.
Moving the Power Supply
English
5