172
External Devices
Calibrate Properties Sheet
The Calibrate properties sheet is shown in Figure 26-5.
Figure 26-5 Calibrate Properties Sheet
The Calibrate properties sheet has one command button. Click on the Calibrate
command button to begin the calibration process. A white screen with a single
cross-hair in the lower left-hand corner displays:
1. Touch the cross-hair. The cross-hair will move to the upper right-hand corner.
2. Touch the cross-hair. The Calibration Complete dialog box displays.
3. Follow the instructions in the Calibration Complete dialog box to complete the
calibration process.