Call Options Properties Sheet - HP Compaq t1000 Series Supplementary Manual

92
Connection Configuration
Call Options
Click on the Call Options tab to invoke the Call Options properties sheet.
Figure 12-3 Call Options Properties Sheet
The following table discusses the functions of this properties sheet.
Table 12-3 Call Options Properties Sheet
Function
Call Setup
Extra Settings
Description
Use this group box to configure the following call
parameters:
Cancel the Call if Not Connected Within
1. Enter in this field the number of seconds to wait
before a call is canceled. The default is 120 with the
function enabled.
2. Click the check box to enable the function.
Wait for Dial Tone Before Dialing
Click on the check box to enable the function. By
default this function is enabled.
Wait for Credit Card Tone
Enter in the field the period (in seconds) of time to wait.
The default is 0.
Use this field for special modem commands. See
"Modem AT Commands" in Getting Help for more
details.