Using The Lpd Config Dialog Box; Rdp Printing; Printers Properties Sheet - HP Compaq t1000 Series Supplementary Manual

182
External Devices

Using the LPD Config Dialog Box

To invoke this dialog box:
1. Press F2 to invoke the Terminal Properties dialog box.
2. Click on the Devices tab.
3. Click on the LPD icon in the icon container.
Table 29-1 discusses the dialog box.
Table 29-1 LPD Config Dialog Box
Function
Enable Printer
Printer Name
Port
Send Form Feed

RDP Printing

You may print to a local printer from RDP (Remote Desktop Protocol) 5.0/Win2K
applications. This paragraph describes how to select the driver for a connected
printer.

Printers Properties Sheet

Figure 29-2 shows the Printers properties sheet. To invoke this properties sheet:
1. Press F2 to invoke the Terminal Properties dialog box.
2. Click on the Printers tab.
Description
Check this check box to enable LPD
printing to a printer connected to your
terminal.
Type in this field the name of the
connected printer. The default for this
field is Noname.
Type in this field the virtual port
number. Virtual port is a logical device
assigned when you set up LPD
services on your server. The default
for this field is 515.
Check this check box to enable form
feeds.