Using The Adapters Configuration Dialog Box; Name Server Properties Sheet - HP Compaq t1000 Series Supplementary Manual

152
External Devices

Using the Adapters Configuration Dialog Box

To open this dialog box:
1. Press F2 to invoke the Terminal Properties dialog box.
2. Click on the Devices tab.
3. Double click on the Adapters icon in the icon container on the Devices
properties sheet.
The following table discusses the functions of the Adapters Configuration dialog
box.
Table 22-1 Adapters Configuration Dialog Box
Function
Adapters
Check Network on BOOT check box
Accept Terminal Name from DHCP
check box
Properties...
Description
This is a list of all the available
adapters on a terminal.
Check this box (default is checked) if
you want the terminal to verify terminal
connection to the network upon boot
(a message is displayed if the test
fails). If you are using an adapter that
does not immediately connect to the
network upon boot, you may desire to
un-check the box so that the message
does not appear each time the
terminal boots.
Some (but not all) DHCP servers can
assign a terminal name through DHCP
option 12. If your DHCP server has
this capability, check this box if you
want your terminal to use this
assigned name (default is Not
Checked).
Click on this command button to
invoke a properties dialog box.
In the properties dialog box are the IP
Address properties sheet and the
Name Server properties sheet. The
following sections discuss these
properties sheets.