HP Compaq t1000 Series Supplementary Manual page 266

Getting Help
Switch between multiple sessions:
• Press Ctrl+Alt+ to proceed to the previous session.
• Press Ctrl+Alt+ to proceed to the next session.
Reset your terminal:
1. Press F2 on your keyboard to invoke the Terminal Properties dialog box.
2. Click on (to check) the Reset the Terminal to Factory Default Property
Settings check box.
3. Click on Yes in the System Settings Change dialog box.
The terminal is reset to factory defaults.
Note
If the above reset procedure fails, call technical
support at Compaq (800-OKCOMPAQ) for
instructions on using a hot-key reset procedure.
Determine the size of the onboard memory:
1. Press F2 on your keyboard to invoke the Terminal Properties dialog box.
2. Read the firmware revision number listed in RAM: on the General properties
sheet.
3. Click on the Close command button on the General properties sheet to
return to Connection Manager.
267