190
External Devices
Table 31-1 discusses the dialog box.
Table 31-1 SNTP Client Settings
Function
SNTP Server drop-down list box
Add, Edit, and Remove command
buttons
Synchronize Time on Boot check
box
Synchronize command button
Description
Permits selection of an SNTP server
from a list built using the Add, Edit,
and Remove command buttons.
Add and Edit open the Edit SNTP
Server dialog box, from which you
may add to the SNTP server list or edit
a current selection. The IP address or
DNS name of the server may be used.
Remove deletes the selected entry
from the list.
Check this box if you want the terminal
to automatically synchronize to the
SNTP time server when the terminal
boots. Default is checked.
Causes the terminal time to
immediately synchronize to the
selected SNTP server. A message
appears if synchronization fails. This
feature can be used to test availability
of listed SNTP servers.