Calibrate Properties Sheet - HP Compaq t1000 Supplementary Manual

130
External Devices

Calibrate Properties Sheet

The Calibrate properties sheet is shown in Figure 21-5.
Figure 21-5 Calibrate Properties Sheet
The Calibrate properties sheet has one command button. Click on the Calibrate
command button to begin the calibration process. A white screen with a single
crosshair in the upper left-hand corner displays:
1. Touch the crosshair. The crosshair will move to the lower right-hand corner.
2. Touch the crosshair. The crosshair will move to the upper right-hand corner.
3. Touch the crosshair. The ELO Touchscreen dialog box displays.
4. Click on OK.
Calibration is complete.