HP Compaq t1000 Series Supplementary Manual page 241

240
Client Security
Table 40-1 Add User Account Dialog Box, Continued
Function
Unassign
Up and Down
Toggle AutoStart
Connection Name
Account Privilege
Description
Use this button to remove a connection from Connection
Name. You must first select the connection you want to
remove.
Select a connection and click on the Up or Down command
button to move it up or down one place in the Connection
Name list. If there are no connections listed in Connection
Name, the command buttons are deactivated.
Click on this command button to toggle between Yes and No.
These two choices are listed under AutoStart in Connection
Name.
List box displaying connections.
Note
The first connection in the list is used by the Single
Button Connect feature. Use the Up and Down buttons
to rearrange the list.
Connection Name
This list shows the connections available to a terminal account.
Type
This section of the list displays the connection type of each
connection. See Type above.
AutoStart
This section of the list displays whether the connection will or
will not start automatically.
Group box used to assign an account an account privilege:
Administrator
Click this radio button to assign the privileges of administrator
to an account. If this function is enabled:
• All connections in Available Connections are
automatically assigned to Connection Name for use.
• Enable Password Change is deactivated but enabled.
Administrators always have the ability to change
passwords.