HP Compaq t1000 Series Supplementary Manual page 67

46
Advanced User Interface
Table 5-1 Network Properties Sheet, Continued
Function
Advanced Network
Description
The Advanced Network command button is enabled if
Specify an IP Address is selected or if a DHCP server was
detected on start-up or and Obtain an IP address from a
DHCP server is selected. Click on this command button to
invoke the Advanced Network Settings dialog box:
Enable DNS
Use the controls in this group to set domain, primary, and
secondary IP addresses for DNS. The default for the group is
disabled (Enable DNS not checked).
Enable WINS
Use the controls in this group to set the primary and secondary
IP addresses of a WINS server. The default for the group is
disabled (Enable WINS not checked).