HP Compaq t1000 Series Supplementary Manual page 246

246
Client Security
Table 41-1 Modify User Account Dialog Box, Continued
Function
Assign
Unassign
Up and Down
Toggle AutoStart
Connection Name
Description
Click on this command button to copy a connection
from Available Connections to Connection Name.
You must first select to highlight the connection you
want to copy.
Use this button to delete a connection from
Connection Name. You must first select to highlight
the connection you want to delete.
Select a connection and click on the Up or Down
command button to move it up or down one place in
the Connection Name list. If there are no connections
listed in Connection Name, the command buttons are
deactivated.
Click on this command button to toggle between Yes
and No. These two choices are listed under AutoStart
in Connection Name.
List box displaying connections.
Note
The first connection in the list is used by the
Single Button Connect feature. Use the Up and
Down buttons to rearrange the list.
Connection Name
This list shows the connections available to a terminal
account.
Type
This section of the list displays the connection type of
each connection. See Type above.
AutoStart
This section of the list displays whether the connection
will or will not start automatically.