Next verify that SNMP Service in the Windows Component Services box shows "Started". Right
•
click SNMP Service, select Properties, and then click the Security tab. Ensure that the properties
appear as shown in Figure 4-12. If not, modify the Accepted community names as shown. Other
community names may be used. If you want to be able to modify the Integrated Management Log
via the management agents, you must have a READ WRITE community defined.
Figure 4-12
SNMP service properties
b.
HP Insight Management Agents—This is the second component that is required in order to use SMH or
HP Systems Insight Manager.
22.
Install SMH if required.
Creating a custom Windows XP-32 image 44