Table of Contents
Advertisement
C-BOX 200
2.7.2 LED Indicators
Power on
The three internal LEDs of the C-BOX 200 (see Figure 2.15) indicate the
following:
POWER ON
WARNING
TX
18 - Installation
Figure 2.15 - LED Indicators
(red) indicates the C-BOX 200 is connected to the power
supply and the power switch is ON.
(red) indicates a warning or error condition: it is ON when a
connection procedure is in progress (the system is busy) or
during a GET/SEND procedure. It blinks when an error
condition occurs. Normally this LED should be OFF.
(green) indicates the RS485 Multidrop activity. When
communication takes place, this LED will blink slightly.
DATALOGIC
Warning
Tx
Advertisement
Table of Contents
Need help?
Do you have a question about the C-BOX 200 and is the answer not in the manual?
Questions and answers