Directional Size Magnification (Mm) - Ricoh DSc332 Operating Instructions Manual

Copying
B B B B
Press [Specifd. Ratio].
C C C C
Press [Direct. Mag.%].
To enter the ratio using the
number keys
A Press [Horizontal].
2
B Enter the ratio using the
number keys, and then press
[#].
C Press [Vertical].
D Enter the ratio using the
number keys, and then press
[#].
E Press [OK].
To specify a ratio using [n
o ]
[o o o
A Press [With n
B Press [Horizontal].
C Adjust the ratio using [n
o ].
[o o o
Note
❒ Pressing [n
the ratio in increments of 1%.
Pressing and holding down
n ] or [o
[n n n
crements of 10%.
❒ If you have incorrectly en-
tered the ratio, readjust it us-
ing [n
D Press [Vertical].
E Adjust the ratio using [n
o ]. o o
[o
F Press [OK].
D D D D
Press [OK].
E E E E
Place the originals, and then press
the { { { { Start} } } } key.
42
n ] and
n n
n o n n o o o ].
n ] or
n n
n ] or [o n n o ] changes o o
o ] changes it in in-
o o
n ] or [o o ].
n n o o
n ] or n n
Directional Size Magnification
(mm)
A suitable reproduction ratio is auto-
matically selected when you enter the
horizontal and vertical lengths of the
original and copy image you require.
1.
Horizontal original size
2.
Vertical original size
3.
Horizontal copy size
4.
Vertical copy size
Preparation
Specify the vertical and horizontal
size of the original and that of the
copy, as shown.
Note
❒ You can enter sizes within the fol-
lowing ranges:
Metric Vertical: 1–999 mm
version (increments of 1 mm)
Horizontal: 1–999 mm
(increments of 1 mm)
Inch 0.1"–99.9" (increments of 0.1")
version
CP2M01EE