Adjust Colour Image - Ricoh DSc332 Operating Instructions Manual

❖ ❖ ❖ ❖ Select Stapling Position
Specify which Top 2 staples or Bot-
tom shown on the initial display
with priority.
Note
❒ Default: Top 2
❒ The 2 tray finisher or booklet
finisher is required to use this
function.
❖ ❖ ❖ ❖ Letterhead Setting
If you select [Yes] for this function,
the machine rotates images cor-
rectly.
Note
❒ Default: No
❒ Orientation-fixed (top to bot-
tom) or two-sided paper might
not print correctly depending
on how the originals and paper
are placed.
Reference
When using letterhead paper,
pay attention to the paper orien-
tation. See "Orientation–Fixed
Paper or Two-Sided Paper" in
"Loading Paper", General Set-
tings Guide.
Settings You Can Change with User Tools

Adjust Colour Image

❖ ❖ ❖ ❖ Background Density of ADS(Full Col-
our / Two-colour)
The background density is adjust-
ed to skip the texture and copy.
You can adjust the background
density up to 5 levels when in Full
Colour or Two-colour.
Note
❒ Default: Centre of the 5 level ad-
justment
❖ ❖ ❖ ❖ Colour Sensitivity
You can adjust the tone of red in
"Two colour (Red & Black)", the
colour specified to convert in "Col-
our Convert" and the colour speci-
fied for "Erase Colour", in 5 levels.
Note
❒ Default: Centre of the 5 level ad-
justment
❒ When the colour width has been
set to "Wider", and the colour to
be deleted, for example is red,
all the colours that are close to
magenta and orange are delet-
ed. If it's set to "Narrower" the
colour red will be deleted.
❖ ❖ ❖ ❖ A.C.S. Sensitivity
This 5-step setting determines the
level of the standard used for dis-
criminating between black & white
originals and full colour originals
when "Auto Colour Select" is se-
lected.
Note
❒ Default: Centre of the 5 level ad-
justment
5
125