Directional Size Magnification (Mm) - Ricoh Aficio A080 Operating Instructions Manual

D D D D
Press [Direct. Mag.%]
To enter the ratio using the
number keys
A Press [Horizontal].
B Enter the ratio using the number
keys, and then press [#].
Note
❒ Use the { { { { .} } } } key to enter a dec-
imal point.
❒ To change the size, press
[Clear], and then enter the
new one.
C Press [Vertical].
D Enter the ratio using the number
keys, and then press [#].
E Press [OK].
To specify a ratio with [n
o o ] o
[o
A Press [With [+][-]].
B Press [Horizontal].
C Adjust the ratio using [n
o ].
[o o o
D Press [Vertical].
E Adjust the ratio using [n
F Press [OK].
E E E E
Press [OK].
Directional Size Magnification
(mm)
A suitable reproduction ratio is auto-
matically selected when you enter the
horizontal and vertical lengths of the
original and copy image you require.
Use this function to alter the image.
n n ] and n
n ] or
n n
1.
Horizontal original size
2.
Vertical original size
3.
Horizontal copy size
4.
Vertical copy size
Preparation
Measure and specify the lengths of
the original and copy by compar-
ing "A" with "a".
Note
❒ Pressing [n
n ] or [o
n n
the ratio in increments of
0.1%. Pressing and holding
n ] or [o o ] changes it
down [n n n o o
in increments of 1%.
❒ If you have incorrectly en-
tered the ratio, readjust it
with [n n ] or [o n n o ]. o o
o o ]. o
[o
Copier Functions
o ] changes
o o
2
n ] or
n n
CP2M01EE
39