Loading Paper Into Large Capacity Tray (Optional) - Ricoh DSc332 Operating Instructions Manual

Troubleshooting
C C C C
Push in the paper tray slowly un-
til it stops.
If a tray is pushed forcefully, the
position of its side guide may shift.
If you load a paper size that is not
selected automatically, you will
need to specify the paper size with
the control panel.
The following paper sizes are not
selected automatically:
• B5 JISL
1
• 8 / "×14"L
2
1
• 8 / "×11"L
2
Reference
p.123 "If you load a paper size
5
that is not selected automatical-
ly".
Loading Paper into Large
Capacity Tray (optional)
LCT(optional) uses A4K paper ex-
clusively. Only load A4K paper. If
you want to load 8
your sales or service representative.
A A A A
Pull out the LCT, slowly until it
stops.
110
1
/ "×11"K, contact
2
ZJKY300J
B B B B
With the print side down, align
all four sides of two paper stacks,
and then load them next to each
other in the tray. Each side has a
limit of 1,000 sheets.
Important
❒ Align the paper stacks and load
them against the left and right
walls, or a paper misfeed might
occur.
❒ Do not stack paper over the lim-
it mark.
C C C C
Push the paper tray slowly in un-
til it stops.
ZDJY009J