Booklet Finisher - Ricoh DSc332 Operating Instructions Manual

Troubleshooting

Booklet Finisher

1. Open the front cover.
2. Hold the lever, and
then pull out the Staple
unit.
5
6. Push in the new cartridge
until it clicks.
126
3. Push the cartridge
button, and then pull
out the cartridge while
lifting the cartridge.
7. Gently push down the
upper unit.
4. Hold both sides of the
cartridge, and then pull
up the upper unit of the
cartridge.
8. Pull out the ribbon.
5. Remove the empty refill
in the direction of the
arrow.
9. Push in the cartridge
until it clicks.
10. Close the front cover
of the finisher.
AAE010S