Three-state switch
Example of the switch design:
Table A7 - Roll-Control2 - Three-state switch
Parameter:
20. Switch type
Description:
This parameter determines which switch types and mode S1 and S2 inputs
operate with.
Set value:
5
Parameter:
151. Roller blind, Awning, Pergola or Curtain
Description:
1×click - Initiate movement to the limit position in the selected
Available values:
0
Parameter:
151. Venetian blind
Description:
1×click - Initiate movement to the limit position in the selected
Available values:
1 or 2
Favorite position – unavailable
Favorite position
Your device has a built-in mechanism for setting favorite positions.
You can activate it by double-clicking on the monostable switch(es) connected to the device or from the mobile interface (mobile app).
Favorite roller blind position
You can define the favorite position of the blinds. It can be set in parameter 159. The default value is set to 50%.
Favorite slats position
You can define the favorite position of the slats angle. It can be set in parameter 160. The default value is set to 50%.
Pot protection
Your device has a built-in mechanism to protect, for example, flowers on the windowsill.
This is the so-called virtual limit switch.
You can set its value in parameter 158.
The default value is 0 - this means that the roller blind moves between the maximum end positions.
LED indicators
The built-in LED shows the current status of the device when the device is powered.
Table A8 - Roll-Control2 - LED colors and their meaninig
Color
Description
Green
The device added to the Z-Wave network (non-secure, S0, S2 not Authenticated)
Magenta
The device added to the Z-Wave network (Security S2 Authenticated)
Red
The device not added to the Z-Wave network
Blinking cyan
Update in progress
direction until the switch selects the stop command
direction until the switch selects the stop command
11
Need help?
Do you have a question about the Roll-Control2 and is the answer not in the manual?