Description And Features - Nice Roll-Control2 Instructions And Warnings For Installation And Use

2

DESCRIPTION AND FEATURES

The NICE Roll-Control2 is a device designed to control roller blinds, awnings, venetian blinds, curtains and pergolas.
The NICE Roll-Control2 enables precise positioning of roller blinds or venetian blind slats. It enables you to control connected devices either
through the Z-Wave® network or through a switch connected directly to it. The device is equipped with energy monitoring.
Main features
• Can be used with:
» roller blinds
» venetian blinds
» pergolas
» curtains
» awnings
» blind motors with electronic or mechanical limit switches
• Has an energy metering
• Supports the Z-Wave® network security modes: S0 with the AES-128 encryption and the S2 Authenticated mode with the PRNG-based
encryption
• Works as a Z-Wave® signal repeater (all non-battery operated devices within the network act as repeaters to increase reliability of the network)
• Can be used with all devices certified with the Z-Wave Plus® certificate and is compatible with such devices produced by other manufacturers
• Works with different types of switches. For the comfort of use, it's recommended to use switches dedicated to the roller shutter operation
(monostable, roller shutter switches)
The device is a Security Enabled Z-Wave Plus
the product.
product and a Security Enabled Z-Wave
®
Controller needs to be used to fully utilize
®
3