Contents The EL-SC-150 Controller may be used as a standalone system controller or as an Extender to any gSC OR SC controller or running g!6.6 or greater. Please Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 check the Training Guide for EL-SC-150 control capabilities.
FCC and IC Information Warning The device meets the exemption from the routine evaluation limits in section 2.5 This Class B digital apparatus complies with Part 15 of the FCC rules and with of RSS 102, and users can obtain Canadian information on RF exposure and Canadian ICES-003 and RSS-247.
All mains operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network. In a Nice SC Series System Controller, the host application controls the device reset feature. PWR IN 2.5A...
Mounting Cabinet Mount, the EL-SC-150 can be mounted in a structured wiring cabinet. The EL-SC-150 is designed to mount on a shelf, hang in a cabinet or rack, 1. Attach mounting bracket to wiring cabinet with snap rivets and washers or mount in a structured wiring enclosure with optional mounting bracket.
Sense Input Connection Connect an RS-232 serial controlled device using an RJ45 connector (not Nice sensors can be used to trigger events from 3rd party devices. The status included) to the RS232 port on the rear of the controller. is binary, either ON or OFF. This can be used to trigger an event map or as a condition of an event map.
HDMI Connection Power The EL-SC-150 includes an HDMI connector for an on screen display (OSD) Once all other connections have been completed, connect an Ethernet cable interface. Connect the OSD output to an available HDMI input on a display or AVR.
IP address or connect via Wi-Fi. notifies Nice in writing, Nice shall repair or replace the item at the company’s option. This warranty Software Update...
Need help?
Do you have a question about the EL-SC-150 and is the answer not in the manual?
Questions and answers